This project brief describes how to build and use an Arduino-compatible interface board that reads a 2-axis thumb joystick and transmits its position over an…
This project brief describes how to build and use an Arduino-compatible interface board that reads a 2-axis thumb joystick and transmits its position over an RS-485 network.
Follow my upgrade of a handheld game controller as I add a new 1.8-inch color LCD for animated graphics and an…
Follow my upgrade of a handheld game controller as I add a new 1.8-inch color LCD for animated graphics and an accelerometer module for motion control input.
In this project article, we design a handheld gaming console with wireless multiplayer functionality using ESP8266…
In this project article, we design a handheld gaming console with wireless multiplayer functionality using ESP8266 microcontrollers. We then program a game for it with the Arduino IDE.
This article provides additional details related to code development, hardware configuration, and the OLED interface.
This article provides additional details related to code development, hardware configuration, and the OLED interface.
In the last installment, we built the hardware to control an AC waveform with a TRIAC as the first step in a DIY solder…
In the last installment, we built the hardware to control an AC waveform with a TRIAC as the first step in a DIY solder reflow oven. This tutorial continues the project by showing you how to set up the low-level hardware to measure temperature, read the zero-cross detector, drive the TRIAC, and print to the serial terminal using a USART.
Facebook
Google
GitHub
Linkedin