This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation performance and presents an accompanying high voltage surge test as proof.
January 14, 2020 by Lim Shiun Pi, Broadcom Inc
This article offers an overview of the various component options for smart meter design and how they can improve the operation of the meters into which they are designed.
December 04, 2018 by Philippe Di Fulvio, Littelfuse Inc
In any high voltage and electrical noise system, the electrostatic discharge (ESD) immunity, an important aspect of electromagnetic compatibility (EMC), is a key consideration in choosing a galvanic isolation device.
November 15, 2018 by Miller Henley
This article outlines traditional half-duplex RS-485 configurations and then presents new alternatives for simplifying the control interface by eliminating the required control lines and software control code.
May 29, 2018 by Bonnie Baker, Maxim Integrated
Digital power supplies are widely employed in high-end servers, storage, telecom brick modules, and more. For these applications, isolation is often required. This article discusses the digital isolation techniques with Analog Devices’ iCoupler products in digital power supply design.
August 01, 2017 by Jason Duan, Analog Devices
This article will briefly discuss isolation in the process control analog input module and the traditional approaches to achieving this. It then outlines an alternative high density, easy to design channel-to-channel isolation analog input module architecture.
March 14, 2017 by Van Yang, Analog Devices
In this project, you'll learn how to wire an LED and flash it using the Raspberry Pi. Also, to isolate the Raspberry Pi's + 3.3VDC compliant output pins from supply voltages greater than this power source, an opto-isolator will be introduced as well.
December 11, 2015 by Don Wilcher
