With the adoption of artificial intelligence and machine learning in a wide variety of applications, reliability verification of AI/ML processors is critical since failures can have major consequences for the validity and legitimacy of AI/ML technology.
January 21, 2020 by Neel Natekar, Mentor
This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation performance and presents an accompanying high voltage surge test as proof.
January 14, 2020 by Lim Shiun Pi, Broadcom Inc
Manufacturing still takes a large portion of time in the electrical engineering cycle. This article discusses how software-driven automation and the IIoT can help hasten the manufacturing process.
December 17, 2019 by Shashank Samala, Tempo Automation
This article looks at the safety standard that governs ADAS features and the challenge in designing power monitoring systems to comply with this standard while introducing an automotive power monitor that has been certified to meet this standard.
September 06, 2019 by Michael Jackson, Maxim Integrated
This article offers an overview of the various component options for smart meter design and how they can improve the operation of the meters into which they are designed.
December 04, 2018 by Philippe Di Fulvio, Littelfuse Inc
This article shows how to implement an analog PID controller, including adjusting of the angular position of a DC motor shaft, editing the design to control its speed, and tuning PID parameters for reliable performance.
August 14, 2018 by Mahmoud Hamdy, Brightskies Technologies
Part 1 of this two-part series discusses the key parameters and features a designer needs to be aware of and how they relate to inclination and stabilization applications, thus helping the designer choose the most suitable accelerometer.
December 12, 2017 by Chris Murphy, Analog Devices
Designing for the IoT comes with a unique set of challenges that require unique hardware solutions to overcome. Learn how smart passive sensors (SPSs)—sensors that function without a battery and without a microcontroller—are an example of IoT-specific design.
December 05, 2017 by ON Semiconductor
The next step of wide-area wireless connection is to bring the power of wireless to machine type communications (MTC). This will drive a revolution in services that will span sectors as diverse as manufacturing, city management, transportation, and energy.
October 17, 2017 by Emmanuel Gresset, CEVA
The industrial Internet of Things (IoT) encompasses the broad transformation underway that will make pervasive sensing across connected machines not just a competitive advantage, but an essential fundamental service. The industrial IoT starts with the edge node, which is the sensing and measurement entry point of interest.
September 12, 2017 by Ian Beavers, Analog Devices
Digital power supplies are widely employed in high-end servers, storage, telecom brick modules, and more. For these applications, isolation is often required. This article discusses the digital isolation techniques with Analog Devices’ iCoupler products in digital power supply design.
August 01, 2017 by Jason Duan, Analog Devices
As system designers search for power efficient signal conditioning components, they may find that there are very few ICs available under 100 μA supply current and even fewer that include a small package variant.
April 18, 2017 by David Plourde, Analog Devices