All About Circuits

Latest Filters Articles and Videos

Categories

Design of FIR Filters Using the Frequency Sampling Method

Design of FIR Filters Using the Frequency Sampling Method

This article will review the basics of the frequency sampling method for designing FIR filters.


When is a Multi-Meter Not Enough? An Introduction to Oscilloscopes

When is a Multi-Meter Not Enough? An Introduction to Oscilloscopes

In this article, we'll discuss when oscilloscopes are a great solution for the time-intensive process of mapping out data on a circuit.


Intelligence at the Edge Part 1: The Edge Node

Intelligence at the Edge Part 1: The Edge Node

The industrial Internet of Things (IoT) encompasses the broad transformation underway that will make pervasive sensing across connected machines not just a competitive advantage, but an essential fundamental service. The industrial IoT starts with the edge node, which is the sensing and measurement entry point of interest.


Incorporating Microphone Functionality into a Robot System

Incorporating Microphone Functionality into a Robot System

In this article, we’ll look at a fairly straightforward circuit that enables a robot or other device to detect sound.


Projects Sep 11, 2017 by Robert Keim
Implementing a Low-Pass Filter on FPGA with Verilog

Implementing a Low-Pass Filter on FPGA with Verilog

Learn how to implement a moving average filter and optimize it with CIC architecture.


Multirate DSP and Its Application in D/A Conversion

Multirate DSP and Its Application in D/A Conversion

This article reviews the basics of D/A conversion and explains how multirate DSP can lead to a more efficient system.


Control, Routing, Multiplexing: A New Analog Switch from Vishay

Control, Routing, Multiplexing: A New Analog Switch from Vishay

Mechanical switches are often impractical in modern embedded designs, and ICs such as the DG2788A offer a high-performance alternative.


News Jun 26, 2017 by Robert Keim
Understanding and Eliminating 1/f Noise

Understanding and Eliminating 1/f Noise

This article defines 1/f noise and goes over ways to reduce or eliminate it in precision measurement applications.


Amplify, Then Convert: A New High-Speed ADC Driver from Linear Tech

Amplify, Then Convert: A New High-Speed ADC Driver from Linear Tech

Good analog-to-digital conversion starts with good pre-ADC signal conditioning. Specialized devices such as the LTC6432-15 can help in this effort.


Flexible ECG Front-End IC Serves Ultra Low-Power IoT Edge Node Signal Processing Designs

Flexible ECG Front-End IC Serves Ultra Low-Power IoT Edge Node Signal Processing Designs

As system designers search for power efficient signal conditioning components, they may find that there are very few ICs available under 100 μ‎A supply current and even fewer that include a small package variant.


Exploring UC Berkeley’s Wearable Sweat Sensor for Monitoring Dehydration

Exploring UC Berkeley’s Wearable Sweat Sensor for Monitoring Dehydration

Researchers develop a wearable sensor for detecting important analytes in sweat for monitoring dehydration.


Isolated Analog-to-Digital Conversion: A New Sigma-Delta Modulator from Broadcom

Isolated Analog-to-Digital Conversion: A New Sigma-Delta Modulator from Broadcom

Isolation components, such as the ACPL-C799, allow you to transfer data without establishing a direct electrical connection between two parts of a system.


Analyzing and Solving Fixed Frequency Spur Issues in High Precision ADC Signal Chains

Analyzing and Solving Fixed Frequency Spur Issues in High Precision ADC Signal Chains

This article will introduce approaches for determining the root causes of spur issues in high-resolution precision ADC applications and present solutions to solve them.


Finding Maximums in Noisy Data

Finding Maximums in Noisy Data

In this article, we'll first study types of noise and then try to eliminate them by filtering the data. Finally, we'll try to find peaks in that data.


PLC DCS Analog Input Module Design Breaks Barriers in Channel-to-Channel Isolation and High Density

PLC DCS Analog Input Module Design Breaks Barriers in Channel-to-Channel Isolation and High Density

This article will briefly discuss isolation in the process control analog input module and the traditional approaches to achieving this. It then outlines an alternative high density, easy to design channel-to-channel isolation analog input module architecture.


New Class D Amplifiers and a DSP for Your Audio Applications

New Class D Amplifiers and a DSP for Your Audio Applications

In this article we’ll look at three new components for amplifying and processing audio signals.


News Mar 10, 2017 by Robert Keim
Analyzing and Managing the Impact of Supply Noise and Clock Jitter on High Speed DAC Phase Noise

Analyzing and Managing the Impact of Supply Noise and Clock Jitter on High Speed DAC Phase Noise

Out of all device properties, noise can be an especially challenging topic to grasp and design for.


New Semiconductor Products for the Receive Chain in Your RF Designs

New Semiconductor Products for the Receive Chain in Your RF Designs

In this article we’ll take a look at three new semiconductor products to keep in mind for your next wireless system.


News Feb 17, 2017 by Robert Keim
What’s Up With Digital Downconverters

What’s Up With Digital Downconverters

Radio architectures can contain more downconversion stages than ever. Here are some tips to keep up.


Build Your Own LED Photography Ring Light

Build Your Own LED Photography Ring Light

LED ring flashes and lights can be a valuable tool for photographers. In this tutorial, we are going to build our own ring light out of LEDs!


Projects Jan 26, 2017 by Alex Udanis