This design solution evaluates the accuracy of thermocouples used for high-temperature measurements as well as resistance temperature detectors (RTDs) used for local cold-junction-compensation (CJC) points.
April 11, 2019 by Bonnie Baker, Maxim Integrated
This article explores how RISC-V, combined with open-source collaboration and standards, is enabling innovation and purpose-built technologies among software engineers, system architects, CTOs, and board designers. It also touches on the possible impact that RISC-V and open source trends could have on the future of data-centric application experiences.
March 20, 2019 by Ted Marena, Western Digital
This article shows how to implement an analog PID controller, including adjusting of the angular position of a DC motor shaft, editing the design to control its speed, and tuning PID parameters for reliable performance.
August 14, 2018 by Mahmoud Hamdy, Brightskies Technologies
This app note implements a binary parity generator and checker with two data input variants, a parallel data input, and a serial data input. It describes the implemented logic, GreenPAKs implementation, and the obtained results.
June 12, 2018 by Dialog Semiconductor
Historically, FPGAs have been challenging to work with. To combat that reputation, Xilinx developed programmable devices that simplify—and accelerate—the implementation of customized hardware development.
June 08, 2018 by Xilinx
Quad flat no-lead and discrete (or dual) flat no-lead packages provide a welcome increase in component density on a PCB area by eliminating leads. However, the solder connection quality cannot be tested by automated optical inspection. This article explores solutions to this often costly problem.
May 31, 2018 by Hans-Jürgen Funke, Nexperia
This article outlines traditional half-duplex RS-485 configurations and then presents new alternatives for simplifying the control interface by eliminating the required control lines and software control code.
May 29, 2018 by Bonnie Baker, Maxim Integrated
SoCs with programmable logic are an essential element of real-time embedded vision systems. Designers can capitalize on the power and efficiency of Xilinx's Zynq Ultrascale+ MPSoC devices to implement their designs using Avnet's Embedded Vision Kits and the Xilinx reVISION stack.
May 18, 2018 by Xilinx
Part 4 of this “Resolving the Signal” article series covers noise in delta-sigma ADCs focuses on understanding basic effective noise bandwidth (ENBW) topics.
April 11, 2018 by Bryan Lizon, Texas Instruments
Systems that incorporate highly integrated and highly sophisticated, high power radio frequency (RF) GaN power amplifiers (PAs), such as pulsed radar applications, are a constant challenge for today’s digital control and management systems to keep up with these ever-increasing levels of sophistication.
November 21, 2017 by Analog Dialogue
Integrated RF agile transceivers are not only widely employed in software-defined radio (SDR) architectures in cellular telephone base stations, such as multiservice distributed access system (MDAS) and small cell, but also for wireless HD video transmission for industrial, commercial, and military applications, such as unmanned aerial vehicles (UAVs).
November 07, 2017 by Wei Zhou, Analog Devices