This article offers an overview of the various component options for smart meter design and how they can improve the operation of the meters into which they are designed.
December 04, 2018 by Philippe Di Fulvio, Littelfuse Inc
This article shows how to implement an analog PID controller, including adjusting of the angular position of a DC motor shaft, editing the design to control its speed, and tuning PID parameters for reliable performance.
August 14, 2018 by Mahmoud Hamdy, Brightskies Technologies
This article looks at a solution to add additional USB charging ports to a vehicle using a single chip containing all the necessary parts and delivers 5V to the device.
July 10, 2018 by Nazzareno Rossetti, Maxim Integrated
This app note implements a binary parity generator and checker with two data input variants, a parallel data input, and a serial data input. It describes the implemented logic, GreenPAKs implementation, and the obtained results.
June 12, 2018 by Dialog Semiconductor
Looking at the electrification of the powertrain, this article explores why 48-volt architecture makes sense and then takes a look at some of the different mounting options for 48-volt starter generators.
April 24, 2018 by Ivan Petrov, Nexperia
Connected industrial machines can sense a wide array of information used to make key decisions within the Industrial Internet of Things (IIoT). A sensor within an edge node can be spatially far removed from any data aggregation point. It must connect through a gateway that links edge data with a network.
January 09, 2018 by Ian Beavers, Analog Devices
In this multipart industrial IoT series, we will break down and explore the fundamental aspects of the edge node interpretation within the larger IoT framework: sensing, measuring, interpreting, and connecting data, with additional consideration for power management and security.
September 26, 2017 by Ian Beavers, Analog Devices
Critical to the success of any product is its user experience. From household appliances through to websites, the ones that succeed are both functional and easy–or even enjoyable–to use.
July 18, 2017 by Scott Soong, Pervasive Displays
With the introduction of a new set of requirements by the US Department of Energy that became law in February 2016, it has become mandatory for manufacturers to improve the efficiency of old designs to meet DoE Level VI in order to sell them to the US market.
July 11, 2017 by Zhihong Yu, Monolithic Power Systems
As system designers search for power efficient signal conditioning components, they may find that there are very few ICs available under 100 μA supply current and even fewer that include a small package variant.
April 18, 2017 by David Plourde, Analog Devices
The growing need to create electricity from a wider variety of energy sources including renewables is driving growing interest in DC power distribution over long distances and within buildings.
January 06, 2017 by Rudy Ramos, Mouser