All About Circuits

Latest Audio Articles and Videos

Categories

Choosing the Right Transistor: Understanding Dynamic MOSFET Parameters

Choosing the Right Transistor: Understanding Dynamic MOSFET Parameters

In this article, we’ll discuss MOSFET characteristics related to transient conditions and switch-mode operation.


An ADC for Low-Power Data Acquisition Designs: A DC-to-204 kHz, Configurable ADC from Analog Devices

An ADC for Low-Power Data Acquisition Designs: A DC-to-204 kHz, Configurable ADC from Analog Devices

This article will look at some of the most important features of the AD7768-1, a new ADC from Analog Devices that is intended for low-power data acquisition (DAQ) designs.


News Jul 10, 2018 by Dr. Steve Arar
Feeling Flashy? Tone It Down with the Gentleman Maker’s Raspberry Pi Colorboringizer

Feeling Flashy? Tone It Down with the Gentleman Maker’s Raspberry Pi Colorboringizer

In this episode of the Gentleman Maker, we'll use a Raspberry Pi 3 Model B, an Arduino Nano, and an Arduino Uno to create a handy system to rid ourselves of overly-colorful fashion choices.


Projects Jul 05, 2018 by Robin Mitchell
How to Select the Cutoff Frequency of Your Low-Pass Filter

How to Select the Cutoff Frequency of Your Low-Pass Filter

This article provides some tips on how to fine-tune the characteristics of a low-pass filter.


Developing Voice-Activated Systems: A Low-Power Stereo ADC from Texas Instruments

Developing Voice-Activated Systems: A Low-Power Stereo ADC from Texas Instruments

This article will look at some of the most important features of TLV320ADC3100 which is TI’s newly-released ADC for voice-activated systems.


News Jun 22, 2018 by Dr. Steve Arar
Basics of Phase Truncation in Direct Digital Synthesizers

Basics of Phase Truncation in Direct Digital Synthesizers

This article will discuss phase truncation in direct digital synthesizers.


Resolving the Signal Part 6: The Effects of Amplifier Noise on Delta-Sigma ADCs

Resolving the Signal Part 6: The Effects of Amplifier Noise on Delta-Sigma ADCs

Part 6 of this 12-part Resolving the Signal series focuses on output- versus input-referred noise, adding an amplifier at the input of an ADC, and low- versus high-resolution ADCs as they relate to amplifier noise.


A Simple, Compact Power Supply for Analog and Mixed-Signal Systems

A Simple, Compact Power Supply for Analog and Mixed-Signal Systems

This project demonstrates and discusses the performance and functionality of an inductorless ±5 V power-supply circuit.


Projects Jun 18, 2018 by Robert Keim
Understanding the Dynamic Range Specification of an ADC

Understanding the Dynamic Range Specification of an ADC

This article will discuss the dynamic range specification of an ADC.


Build Your Own Negative Voltage Generator

Build Your Own Negative Voltage Generator

Everyone needs a negative voltage rail eventually, but most only have a single rail supply. This project will show you how to build a negative voltage generator that runs off a single rail supply!


Projects Jun 07, 2018 by Robin Mitchell
PCB Layout for a Charge-Pump Bipolar Power Supply

PCB Layout for a Charge-Pump Bipolar Power Supply

In this article we’ll look at the PCB design for a low-noise ±5 V inductorless power supply.


Two New SPI Analog Mux Switches from Analog Devices

Two New SPI Analog Mux Switches from Analog Devices

Analog Devices recently announced two new SPI-controlled analog mux switches: the ADGS1208, which has eight single channels, and the ADGS1209, which has four differential channels.


News May 25, 2018 by Nick Davis
Resolving the Signal Part 5: Understanding Effective Noise Bandwidth in Precision Delta-Sigma ADCs

Resolving the Signal Part 5: Understanding Effective Noise Bandwidth in Precision Delta-Sigma ADCs

Part 5 of this 12-part series continues to explore effective noise bandwidth as it relates to delta-sigma ADCs and system-level design by stepping through a simple example using a two-stage filter to understand how to calculate the ENBW and how system changes affect the ENBW.


Considerations for FPGA Implementation of Linear-Phase FIR Filters

Considerations for FPGA Implementation of Linear-Phase FIR Filters

This article will review considerations for efficient FPGA implementation of symmetric FIR filters.


Designing a Charge-Pump Bipolar Power Supply

Designing a Charge-Pump Bipolar Power Supply

This article presents and discusses a schematic design for a ±5 V inductorless power supply.


Boosting and Inverting without Inductors: Charge-Pump Power Supplies

Boosting and Inverting without Inductors: Charge-Pump Power Supplies

This article discusses charge-pump DC/DC converters and introduces a design for an inductorless bipolar power-supply circuit.


My 40-Year Love Affair with a Remarkable Amplifier—A Class B Amplifier for Audiophiles

My 40-Year Love Affair with a Remarkable Amplifier—A Class B Amplifier for Audiophiles

The Blomley amplifier was designed over forty years ago, is an alternative power amplifier design that suffers virtually no distortion, and provides a sound which has the presence often lacking in conventional amplifiers.


The PNP Transistor: Characteristics and Applications

The PNP Transistor: Characteristics and Applications

This article helps you understand what PNP transistors are, how they’re used, and why they’re less common than NPN transistors.


Resolving the Signal Part 4: Understanding Effective Noise Bandwidth in Precision Delta-Sigma ADCs

Resolving the Signal Part 4: Understanding Effective Noise Bandwidth in Precision Delta-Sigma ADCs

Part 4 of this “Resolving the Signal” article series covers noise in delta-sigma ADCs focuses on understanding basic effective noise bandwidth (ENBW) topics.


BJTs after Biasing: Analyzing BJTs with a Small-Signal Model

BJTs after Biasing: Analyzing BJTs with a Small-Signal Model

This article presents two circuits that can be used to analyze the small-signal behavior of a bipolar junction transistor.