Maxim Integrated is accelerating innovation in Europe with a $25 million investment for a new design center in Dublin, Ireland.
March 02, 2020 by Luke James
In Part 5 of this series on composite amplifiers, we'll discuss how to achieve higher DC precision.
February 25, 2020 by Dr. Sergio Franco
British researchers have been investigating the effects of sound and light on the data transmission process in order to try and increase transfer speeds.
February 25, 2020 by Luke James
Learn how to get faster composite op-amp dynamics by raising the slew rate.
February 24, 2020 by Dr. Sergio Franco
This is Part 3 of the series of articles about composite amplifiers. In this section, we are going to show how to achieve faster op-amp dynamics by expanding the frequency bandwidth.
February 23, 2020 by Dr. Sergio Franco
Learn how simulating a voltage buffer can help you implement it more effectively to boost the output current drive of an op-amp.
February 21, 2020 by Dr. Sergio Franco
In the first part of this series on composite amplifiers, we'll investigate one method of boosting an op-amp’s output current drive capability.
February 20, 2020 by Dr. Sergio Franco
This New Product Brief (NPB) is part of a video series highlighting the features, applications, and technical specs of newly-released products.
February 14, 2020 by Mouser Electronics
This Featured Product Spotlight is part of a video series exploring the specifications, applications, and market context of new products.
February 11, 2020 by Mouser Electronics
February 04, 2020 by Mouser Electronics
Analog Devices' Automotive Audio Bus (A2B) technology uses a daisy-chain topology and combines power and data into a single twisted pair.
January 29, 2020 by Robin Mitchell
In this article, we will see how we can determine the SFDR for an ADC used in a radio receiver. Also, we’ll examine the ADC SNR requirement for this application.
December 22, 2019 by Steve Arar
This article will discuss the basic idea behind the synchronous demodulation technique.
December 11, 2019 by Steve Arar
On November 22, Harvey C. Nathanson passed away, leaving a legacy as the father of the first MEMs device.
December 07, 2019 by Robin Mitchell
The PAM8940E can generate its own drive voltage while still driving large external loads up to 47nF.
December 06, 2019 by Robin Mitchell
In this article, learn about INICnet and how it helps to solve the question of how designers can create a safe and effective connectivity method for vehicles.
December 03, 2019 by Carmelo De Mola, Microchip
December 03, 2019 by Mouser Electronics
In this article, we’ll look at the spurious free dynamic range (SFDR) which is a popular specification for quantifying the linearity of a circuit.
December 01, 2019 by Steve Arar
The P348 is designed for transducer simulation and provides carrier frequencies over a range of 0.5MHz to 20MHz.
November 26, 2019 by Gary Elinoff
TI designed the new ADC to capture low-distortion audio recordings from far distances or in noisy environments.
November 05, 2019 by Lisa Boneta
Don't have an AAC account? Create one now.
Forgot your password? Click here.
