All About Circuits

Latest IC Design Industry Articles

Categories

Implementing a Binary Parity Generator and Checker with GreenPAK

Implementing a Binary Parity Generator and Checker with GreenPAK

This app note implements a binary parity generator and checker with two data input variants, a parallel data input, and a serial data input. It describes the implemented logic, GreenPAKs implementation, and the obtained results.


Making the Cloud More Powerful: Xilinx FPGAs and Adaptive Workload Acceleration

Making the Cloud More Powerful: Xilinx FPGAs and Adaptive Workload Acceleration

Historically, FPGAs have been challenging to work with. To combat that reputation, Xilinx developed programmable devices that simplify—and accelerate—the implementation of customized hardware development.


Circle the Wagons: Choosing the Right Protection ICs for Your Smart Load

Circle the Wagons: Choosing the Right Protection ICs for Your Smart Load

This article reviews the fundamental features of an effective protection scheme, highlights the shortcoming of a typical protection implementation—such as a high bill of materials and PC board size occupation—and introduces a new family of integrated, highly flexible protection ICs that address these concerns.


Accelerating Embedded Vision Integration with Xilinx SoCs and the reVISION Stack

Accelerating Embedded Vision Integration with Xilinx SoCs and the reVISION Stack

SoCs with programmable logic are an essential element of real-time embedded vision systems. Designers can capitalize on the power and efficiency of Xilinx's Zynq Ultrascale+ MPSoC devices to implement their designs using Avnet's Embedded Vision Kits and the Xilinx reVISION stack.


Utilizing Xilinx’s MicroBlaze in FPGA Design

Utilizing Xilinx’s MicroBlaze in FPGA Design

MicroBlaze is a 32-bit soft RISC processor core, created to accelerate the development of cost-sensitive, high-volume applications that traditionally required one or more microcontrollers.


How to Design Low-Cost Contactless Position Sensors

How to Design Low-Cost Contactless Position Sensors

In this video, we’ll demonstrate an inductive sensing technique used for contactless position sensing.


How to Run From a Coin Cell for 10 Years

How to Run From a Coin Cell for 10 Years

Check out this buck converter that is designed to extend battery life from months to years in IoT applications, like sensor nodes and beacons.


Solving the Power Challenges of Integrating Multiple GbE Interfaces

Solving the Power Challenges of Integrating Multiple GbE Interfaces

An exploration of how new mid-range FPGAs can perform bridging functions for Ethernet and Gigabit Ethernet (GbE) links while addressing the issue of low power consumption.


Using Low-Voltage Drivers to Boost RF Power Amplifier Efficiency

Using Low-Voltage Drivers to Boost RF Power Amplifier Efficiency

The growing use of wireless data is driving demand for communication systems that can transmit more data with greater energy efficiency, in order to both cut operating costs and, in mobile devices, to increase battery life.


How To Simplify USB PD 1-4s Charging Design

How To Simplify USB PD 1-4s Charging Design

In this video, we'll take a look at a buck/boost battery manager IC that can charge your device battery using standard USB PD voltages—but it can also work in reverse, providing output to power or charge other devices.


GaN Breaks Barriers—RF Power Amplifiers Go Wide and High

GaN Breaks Barriers—RF Power Amplifiers Go Wide and High

This article describes the state of the semiconductor technology that is enabling new developments with shorter gate length GaAs and GaN transistors, circuit design considerations to achieve optimum performance, and examples of both GaAs and GaN wideband power amplifiers (PAs) that demonstrate today’s technology.


Implementing an Electronic Leveling Tool

Implementing an Electronic Leveling Tool

While it can be challenging to design electronic versions of precision tools, in this Industry Article we design an electronic level that matches the features of a conventional tool.


Intelligence at the Edge Part 2: Reduced Time to Insight

Intelligence at the Edge Part 2: Reduced Time to Insight

In this multipart industrial IoT series, we will break down and explore the fundamental aspects of the edge node interpretation within the larger IoT framework: sensing, measuring, interpreting, and connecting data, with additional consideration for power management and security.


RISC-V: Transforming the Development of SoC Devices that Combine FPGAs and Microcontrollers

RISC-V: Transforming the Development of SoC Devices that Combine FPGAs and Microcontrollers

Until recently, developers integrating a FPGA fabric with a microcontroller were severely limited in their choice of IP licensing options. Using open-source tools with a RISC-V core in a FPGA is present a solution to that problem.


How to Easily Add USB Power Delivery to a Design

How to Easily Add USB Power Delivery to a Design

In this video, we’ll cover some of the aspects of USB Power Delivery, or USB PD, which greatly expands on the simple 5 V supply built into regular USB.


Legislation in Power Supply Efficiencies Calls for Adopting Synchronous Rectifiers in Offline Power

Legislation in Power Supply Efficiencies Calls for Adopting Synchronous Rectifiers in Offline Power

With the introduction of a new set of requirements by the US Department of Energy that became law in February 2016, it has become mandatory for manufacturers to improve the efficiency of old designs to meet DoE Level VI in order to sell them to the US market.


Op-Amp Input Overvoltage Protection: Clamping vs. Integrated

Op-Amp Input Overvoltage Protection: Clamping vs. Integrated

High precision op amps enable system designers to create circuits that condition signals (amplify, filter, and buffer) while maintaining the precision of the original signal. The precision of the total system depends on maintaining the precision of the signal path.


Installing a Tire Pressure Monitoring System

Installing a Tire Pressure Monitoring System

Tire pressure monitoring systems are a necessary safety feature in cars. This project looks at the different system types and how a TPMS can be retrofitted on older cars.


Flexible ECG Front-End IC Serves Ultra Low-Power IoT Edge Node Signal Processing Designs

Flexible ECG Front-End IC Serves Ultra Low-Power IoT Edge Node Signal Processing Designs

As system designers search for power efficient signal conditioning components, they may find that there are very few ICs available under 100 μ‎A supply current and even fewer that include a small package variant.


PLC DCS Analog Input Module Design Breaks Barriers in Channel-to-Channel Isolation and High Density

PLC DCS Analog Input Module Design Breaks Barriers in Channel-to-Channel Isolation and High Density

This article will briefly discuss isolation in the process control analog input module and the traditional approaches to achieving this. It then outlines an alternative high density, easy to design channel-to-channel isolation analog input module architecture.