This article discusses the use of an encoder to ensure accurate ongoing tracking of a motor's rotor shaft and the key factors that will help in the selection of the encoder based on different parameters.
March 16, 2021 by Jason Kelly, CUI Devices
This article discusses some concepts for ensuring motion detector designs will be robust to external disturbances by presenting an infrared detector assembly that can significantly reduce the parts count and improve product performance and reliability.
February 23, 2021 by Ryan Sheahen, Littelfuse
Leveraging board-level cameras offer a variety of benefits. To help identify the right mix of features and design elements, here are some factors to consider when selecting and designing in an embedded machine vision camera.
February 11, 2021 by Brian Cha, FLIR
Learn about the benefits of time-sensitive networking (TSN) and how engineers use it to ensure that an industrial system is ready for the future. This article focuses on three members of the set of TSN standards.
January 19, 2021 by Jeff Steinheider, NXP Semiconductors
This article provides an overview of access control topology in smart homes and industrial buildings by covering the various protection and sensing solutions engineers can use in their designs.
November 17, 2020 by Ryan Sheahen, Littelfuse
NXP’s i.MX 8M Plus applications processor enables machine learning and intelligent vision for consumer applications and the industrial edge. Learn about the features of this processor and how it can be used in embedded vision systems.
October 22, 2020 by Jeff Steinheider, NXP Semiconductors
Autonomous drones and robots utilize small motors. These fast-spinning mini motors require miniature encoders and IC package sizes. This article shows how an optical sinusoidal encoder provides a higher resolution and increased speeds with a 2x3 mm dual simultaneous-sampling SAR-ADC.
August 11, 2020 by Bonnie Baker, Maxim Integrated
Explore the LPC55S16, an MCU well-suited for industrial and professional applications, thanks to its fast clock speed of 150 MHz, out-of-the-box support for communicating over a CAN-FD bus network, and low current consumption.
August 06, 2020 by Mark Dunnett, on Behalf of NXP
Semiconductor manufacturing is a complex industry and small improvements anywhere in the process can make a big difference to the bottom line. This article discusses the benefits of continually optimizing manufacturing for the semiconductor industry by introducing smart manufacturing solutions.
May 19, 2020 by Tim Hewitt, Siemens Digital Industries Software
With the adoption of artificial intelligence and machine learning in a wide variety of applications, reliability verification of AI/ML processors is critical since failures can have major consequences for the validity and legitimacy of AI/ML technology.
January 21, 2020 by Neel Natekar, Mentor
This article discusses how the use of three key design methods utilized in optocouplers improves galvanic isolation performance and presents an accompanying high voltage surge test as proof.
January 14, 2020 by Lim Shiun Pi, Broadcom Inc
Manufacturing still takes a large portion of time in the electrical engineering cycle. This article discusses how software-driven automation and the IIoT can help hasten the manufacturing process.
December 17, 2019 by Shashank Samala, Tempo Automation
Power system designers are constantly under pressure because they are tasked with developing highly adaptive solutions that comply with today’s operating environments without interrupting design-to-manufacture cycles.
June 28, 2019 by MINMAX