Latest IT / Networking Technical Articles

Finally, we have everything we need for a functional robot. Let’s put the pieces together and see what the C-BISCUIT…

Finally, we have everything we need for a functional robot. Let’s put the pieces together and see what the C-BISCUIT demo bot can do.

This article introduces the RS-422 and RS-485 interfaces and explains why you might want to use them in your designs.

This article introduces the RS-422 and RS-485 interfaces and explains why you might want to use them in your designs.

Learn about the important characteristics, benefits, and applications of differential signaling, as well as the proper…

Learn about the important characteristics, benefits, and applications of differential signaling, as well as the proper layout techniques for differential signals.

Freeze moments in time to easily produce extraordinary close-up pictures with your digital camera, an Arduino, and these…

Freeze moments in time to easily produce extraordinary close-up pictures with your digital camera, an Arduino, and these simple circuits.

Create a tracking device with an HC-12 transceiver, a GPS module, an Arduino, and Google Maps.

Create a tracking device with an HC-12 transceiver, a GPS module, an Arduino, and Google Maps.

Learn how to build your own touchless MIDI controller using an Arduino... video and code file included.

Learn how to build your own touchless MIDI controller using an Arduino... video and code file included.

This article uses examples to explain the technique of source transformation.

This article uses examples to explain the technique of source transformation.

In part 3, we compile the firmware and build the controller at the heart of the Saber, then do initial testing and diagnostics.

In part 3, we compile the firmware and build the controller at the heart of the Saber, then do initial testing and diagnostics.

In part 2 of the LED saber project, we'll assemble the power and audio systems.

In part 2 of the LED saber project, we'll assemble the power and audio systems.

Tutorial on designing a Bluetooth Low Energy (BLE) circuit with the ability to measure 9-axis motion, humidity, and temperature.

Tutorial on designing a Bluetooth Low Energy (BLE) circuit with the ability to measure 9-axis motion, humidity, and temperature.

An introduction to the Analog Discovery 2 by Digilent.

An introduction to the Analog Discovery 2 by Digilent.

Embedded and wearable systems require new ideas for input controller hardware. But older software still expects a…

Embedded and wearable systems require new ideas for input controller hardware. But older software still expects a keyboard and mouse. How do we bridge the gap without having to write kernel drivers?

The 3D Magnetic 2GO kit is a development kit for the TLV493D from Infineon that can detect magnetic field strength in x,…

The 3D Magnetic 2GO kit is a development kit for the TLV493D from Infineon that can detect magnetic field strength in x, y, and z directions.

In this article we’ll take a close look at two sections of the custom-designed control board for the C-BISCUIT demo bot.

In this article we’ll take a close look at two sections of the custom-designed control board for the C-BISCUIT demo bot.

Use an Arduino/Genuino 101 with iAQ-Core air quality and HIH-6131 temperature/humidity sensors to make an Indoor Air…

Use an Arduino/Genuino 101 with iAQ-Core air quality and HIH-6131 temperature/humidity sensors to make an Indoor Air Quality Monitor with Bluetooth low energy (BLE) connectivity.

In this first part of a multi-part series, we will use a Tek MDO Mixed Domain Oscilloscope to illustrate options to…

In this first part of a multi-part series, we will use a Tek MDO Mixed Domain Oscilloscope to illustrate options to measure various circuit elements.

The C-BISCUIT saga continues as we combine the various system components into a demo bot.

The C-BISCUIT saga continues as we combine the various system components into a demo bot.

Here's a rain gauge that empties itself and that you can read from your easy chair. Best of all, you can build it, yourself.

Here's a rain gauge that empties itself and that you can read from your easy chair. Best of all, you can build it, yourself.

In part 8 of the "Building Raspberry Pi Controller" series, readers will learn how to attach a camera board to a…

In part 8 of the "Building Raspberry Pi Controller" series, readers will learn how to attach a camera board to a Raspberry Pi and write Python code for photo imaging projects.