RF amplifier design is a challenging task, involving trade-offs between linearity, efficiency, gain, and output power. Here, we examine how a common-emitter…
RF amplifier design is a challenging task, involving trade-offs between linearity, efficiency, gain, and output power. Here, we examine how a common-emitter circuit can, or can't, function as a power amplifier.
This article will help you understand losses in high-frequency transmission lines that include traces on PCBs. We will…
This article will help you understand losses in high-frequency transmission lines that include traces on PCBs. We will also investigate how these losses impact signal propagation and the quality of digital signals.
The Y-factor method is a widely used technique for measuring the gain and noise figure (NF) of RF components. This…
The Y-factor method is a widely used technique for measuring the gain and noise figure (NF) of RF components. This article will help you understand the differences between the insertion gain and the available gain, while avoiding potentially significant errors when measuring the noise figure.
Researchers at Northwestern University Center for Bio-Integrated Electronics are championing the development of sweat…
Researchers at Northwestern University Center for Bio-Integrated Electronics are championing the development of sweat biosensors with their latest glucose and lactate sensors.
Tutorial on designing a Bluetooth Low Energy (BLE) circuit with the ability to measure 9-axis motion, humidity, and temperature.
Tutorial on designing a Bluetooth Low Energy (BLE) circuit with the ability to measure 9-axis motion, humidity, and temperature.
In this article, we are going to learn some basics about RFID technology and use an Arduino MEGA to a play around with a…
In this article, we are going to learn some basics about RFID technology and use an Arduino MEGA to a play around with a popular RFID module, the ID12LA.
Facebook
Google
GitHub
Linkedin