Latest Filters Articles and Videos

Categories

Modern Power Switches Zero In on Accurate Current Sensing

ST's new intelligent high-side drivers illustrate how accurate current sensing is a non-negotiable feature of modern power switches, especially in the automotive space.

October 02, 2021 by Dr. Steve Arar

How to Protect Low-Speed Interfaces and Power Supply Circuits

In this installation of the "Protect Your Ports! Top Design Tips to Keep Your Communications Connected" series, we'll discuss low-speed interfaces and power supply circuits—including audio/video ports, DC power supplies, and more—as well as various methods of how to protect them.

July 11, 2021 by Todd Phillips, Littelfuse

An Introduction to Digital Signal Processing

This article provides a general understanding of what DSP is, how it works, and what advantages it can offer. To appreciate the advantages of DSP, let’s first have a look at the conventional method of signal processing, i.e., analog signal processing.

June 30, 2021 by Dr. Steve Arar

TI’s New SAR ADCs Beat Old Noise and Sampling Rate Challenges

TI extends its family of SAR ADCs, striving to beat old design challenges. How do these new family members stack up when compared to some competitors?

June 21, 2021 by Antonio Anzaldua Jr.

TI vs. NXP vs. Analog: Comparing Battery Management Systems

Recently, Analog Devices has added to its battery management system portfolio. Since EV systems are quickly advancing, the question of how does this system compare to others?

June 12, 2021 by Antonio Anzaldua Jr.

Xilinx Aims to Speed Up System Design with Gen3 RF SoM

One method of accelerating system design is with a system-on-module (SoM). The newest XRF16-Gen3 Xilinx-based SoM from AVNET has improvements worth evaluating.

May 24, 2021 by Adrian Gibbons

LVDT Demodulation: Rectifier-Type vs. Synchronous Demodulation

Learn how two methods of demodulation compare: synchronous demodulation and rectifier-type demodulation. Here we discuss each method's advantages, drawbacks, and appropriate applications.

May 23, 2021 by Dr. Steve Arar

An Introduction to Switched-capacitor Circuits

In this series of articles, we’ll discuss one of the fundamental building blocks of analog IC design: the switched-capacitor circuit.

April 21, 2021 by Jake Hertz

“MUS-IC” to an Audiophile’s Ears? Lessons on Hi-Fi Electronics From a New DAC

MUS-IC, ROHM Semiconductor’s specialized family of audio electronics has a new member: a 32-bit DAC designed for high-res playback. What does this DAC teach us about the tenets of Hi-Fi electronics?

April 19, 2021 by Adrian Gibbons

Protecting Power Over Ethernet (PoE / PoE++) Communications

This article is the first in the "Protect Your Ports! Top Design Tips to Keep Your Communications Connected" series from Littelfuse.

April 14, 2021 by Todd Phillips, Littelfuse

New Load Switch Underlines the Place of “True Reverse-current Blocking”

High-voltage electronics cause a number of issues for FETs used as load switches. A new device from Diodes Incorporated aims to tackle the long-standing issue of reverse current.

March 15, 2021 by Jake Hertz

Scientists Reimagine Organic Transistors for Low-power, High-amplification Biowearables

Scientists at the Terasaki Institute have put their own spin on organic electrochemical transistors (OECTs) to improve the performance in wearable health devices.

March 12, 2021 by Jake Hertz

What Is the Power Spectrum of Quantization Noise?

Our series on quantization noise begins with a clarification of the framework the author used to determine the scope of his investigation into quantization noise.

March 07, 2021 by Wes Brodsky

Adding a Low-pass Filter to an ADC Model and DAC Modeling

In the final part of this series on modeling ADCs, we discuss one more model and also briefly cover DAC models.

March 02, 2021 by Wes Brodsky

Modeling ADCs Using Intermodulation Polynomial and Effective Number of Bits

In this article, we discuss another methodology of how to model ADCs in system simulations, this time by using the effective number of bits and also adjusting our ADC by introducing a 5th order polynomial to the ideal quantizer input.

February 28, 2021 by Wes Brodsky

Digital or Analog? How Should I and Q Combining and Separation Be Done?

How should I and Q combining be done? Through analog or digital means? This article will discuss the basics of the analog and digital IQ approaches.

February 22, 2021 by Wes Brodsky

How Do New Wireless Protocols Like Wi-Fi6E Affect RF Front-End Design?

RF front ends are one of the most important hardware blocks involved in RF design, but they’re not a one-size-fits-all solution.

February 11, 2021 by Jake Hertz

6 Causes of MOS Transistor Leakage Current

Leakage current can contribute to power dissipation, especially at lower threshold voltages. Learn about six types of leakage current that can be found in MOS transistors.

February 01, 2021 by Nirbindu Das

TDK ESD Notch Filters | New Product Brief

This New Product Brief (NPB) is part of a video series highlighting the features, applications, and technical specs of newly-released products.

January 30, 2021 by Mouser Electronics

Understanding the Leakage Current Components in Short Channel MOS Transistors

This article covers the basics of MOS transistors with a view towards better understanding the leakage current that can occur in such transistors.

January 29, 2021 by Nirbindu Das