Latest Data Converters Technical Articles

Learn about the basics of grounds, grounding, and ground symbols. Not all grounds are created equal. In this article,…

Learn about the basics of grounds, grounding, and ground symbols. Not all grounds are created equal. In this article, we'll discuss earth ground, common ground, analog ground, and digital ground.

This article will go over some general tips you can use when designing a DC-DC buck converter.

This article will go over some general tips you can use when designing a DC-DC buck converter.

Learn how to simulate noise using LTspice and use this great tool to learn more about low-noise design.

Learn how to simulate noise using LTspice and use this great tool to learn more about low-noise design.

What is filtering? Learn what resistor-capacitor (RC) low-pass filters are and where you can use them.

What is filtering? Learn what resistor-capacitor (RC) low-pass filters are and where you can use them.

Learn about simulating an interesting current source built around an op-amp and an instrumentation amplifier.

Learn about simulating an interesting current source built around an op-amp and an instrumentation amplifier.

This article presents a high-performance current source that requires only a few readily available components.

This article presents a high-performance current source that requires only a few readily available components.

Learn the methods and applications of modeling the quantization error of an ADC using a noise source.

Learn the methods and applications of modeling the quantization error of an ADC using a noise source.

This article examines the quantization error of an analog-to-digital converter.

This article examines the quantization error of an analog-to-digital converter.

The current mirror is an important analog building block that finds application in such diverse areas as DC biasing and…

The current mirror is an important analog building block that finds application in such diverse areas as DC biasing and current-mode signal processing.

This article continues the Introduction to Microcontrollers series with a discussion of the most important things to…

This article continues the Introduction to Microcontrollers series with a discussion of the most important things to consider when you’re trying to find the best MCU for your next project.

This article will examine some properties of the DNL and INL specifications.

This article will examine some properties of the DNL and INL specifications.

This article looks at the DNL and INL specifications of a digital-to-analog converter (DAC).

This article looks at the DNL and INL specifications of a digital-to-analog converter (DAC).

This article looks at the voltage-mode R-2R DAC structure.

This article looks at the voltage-mode R-2R DAC structure.

How can we gauge stability in a negative-feedback circuit? For minimum-phase circuits, try rate-of-closure.

How can we gauge stability in a negative-feedback circuit? For minimum-phase circuits, try rate-of-closure.

In this article, we continue our study of the current-feedback amplifier. We’ll also look at a composite amplifier that…

In this article, we continue our study of the current-feedback amplifier. We’ll also look at a composite amplifier that combines the benefits of the voltage-feedback topology and the current-feedback topology.

Learn about the process of identifying and eliminating noise in data capture.

Learn about the process of identifying and eliminating noise in data capture.

This article takes a detailed look at the way in which pass-transistor logic degrades a signal and how this signal…

This article takes a detailed look at the way in which pass-transistor logic degrades a signal and how this signal degradation can be remedied.

This article discusses the use of pass-transistor configurations in the design of gated latches.

This article discusses the use of pass-transistor configurations in the design of gated latches.

This article discusses the efficient multiplexers that can be created by using MOSFETs in a pass-transistor configuration.

This article discusses the efficient multiplexers that can be created by using MOSFETs in a pass-transistor configuration.