Latest Wireless/RF Technical Articles

Antennas provide the wireless linkage required for any satellite-based system. Here's a look at the many antennas of GPS.

Antennas provide the wireless linkage required for any satellite-based system. Here's a look at the many antennas of GPS.

Optocouplers are undoubtedly effective, but alternative isolation technologies may be a better choice for your application.

Optocouplers are undoubtedly effective, but alternative isolation technologies may be a better choice for your application.

This article will discuss the dynamic range specification of an ADC.

This article will discuss the dynamic range specification of an ADC.

This article discusses digital down-conversion which is a digital-signal-processing technique widely used in digital…

This article discusses digital down-conversion which is a digital-signal-processing technique widely used in digital radio receivers.

This article explores the schematic design and basic features of a smart programmable wireless controller module I…

This article explores the schematic design and basic features of a smart programmable wireless controller module I designed: the WiCard.

This technical brief explains two distinct types of electromagnetic interference.

This technical brief explains two distinct types of electromagnetic interference.

In this article, we will take a look at the XDK110 rapid prototyping kit, characterize its hardware, explore its software…

In this article, we will take a look at the XDK110 rapid prototyping kit, characterize its hardware, explore its software environment, and demonstrate connecting the device to the MQTT messaging service.

This article demonstrates a solderless-breadboard compatible carrier-board for a pre-certified BLE4 or BLE5 module made…

This article demonstrates a solderless-breadboard compatible carrier-board for a pre-certified BLE4 or BLE5 module made by GT-Tronics. Use it to experiment with your own BLE5 compatible designs.

Does the addition of a feedback divider affect PLL transient response? We’ll look at this question and other…

Does the addition of a feedback divider affect PLL transient response? We’ll look at this question and other frequency-multiplication topics in this article.

This article explains how a PLL can be used to produce a high-frequency clock from a low-frequency reference signal.

This article explains how a PLL can be used to produce a high-frequency clock from a low-frequency reference signal.

In this article we’ll explore PLL transient-response optimization using simulations and a design example.

In this article we’ll explore PLL transient-response optimization using simulations and a design example.

In this article we’ll explore the mathematical relationships that will help you to design a PLL that quickly and…

In this article we’ll explore the mathematical relationships that will help you to design a PLL that quickly and smoothly locks onto the input frequency.

In this article we’ll use SPICE simulations to take a close look at how a phase-locked loop enters the locked state.

In this article we’ll use SPICE simulations to take a close look at how a phase-locked loop enters the locked state.

This article presents an LTspice circuit that can be used to explore the behavior of a phase-locked loop.

This article presents an LTspice circuit that can be used to explore the behavior of a phase-locked loop.

This article introduces a phase-based feedback system that plays an important role in many applications.

This article introduces a phase-based feedback system that plays an important role in many applications.

This article looks at some circuits that can help you extract the original data from a Manchester-encoded signal.

This article looks at some circuits that can help you extract the original data from a Manchester-encoded signal.

This article discusses implementation details for a simple yet effective technique that can improve your digital communication.

This article discusses implementation details for a simple yet effective technique that can improve your digital communication.

Embrace the power of Power over Ethernet with Microchip's Ethernet of Everything!

Embrace the power of Power over Ethernet with Microchip's Ethernet of Everything!

This article, part of AAC’s Analog Circuit Collection, explores a self-biased class C stage that could be used in an RF…

This article, part of AAC’s Analog Circuit Collection, explores a self-biased class C stage that could be used in an RF power amplifier.