All About Circuits

Latest Technical Articles

Categories

Hardware Assessment: OPB9000 Reflective Light Sensor from TTElectronics

Hardware Assessment: OPB9000 Reflective Light Sensor from TTElectronics

The OPB9000 is a reflective light sensor from TTElectronics with programmable output and sensitivity levels.


Projects Jul 27, 2018 by Mark Hughes
PCB Layout Tips and Tricks: Minimizing Decoupling Inductance

PCB Layout Tips and Tricks: Minimizing Decoupling Inductance

This article examines some subtle details associated with the high-frequency performance of decoupling capacitors.


How Do Satellites Communicate with a GPS System? A Look at the GPS Antenna

How Do Satellites Communicate with a GPS System? A Look at the GPS Antenna

Antennas provide the wireless linkage required for any satellite-based system. Here's a look at the many antennas of GPS.


Choosing the Right Transistor: Understanding Dynamic MOSFET Parameters

Choosing the Right Transistor: Understanding Dynamic MOSFET Parameters

In this article, we’ll discuss MOSFET characteristics related to transient conditions and switch-mode operation.


Choosing the Right Transistor: Understanding Low-Frequency MOSFET Parameters

Choosing the Right Transistor: Understanding Low-Frequency MOSFET Parameters

This article provides an overview of various characteristics and specifications that are relevant to low-frequency MOSFET operation.


PCB Layout Tips and Tricks: How to Optimize Your Decoupling Connection

PCB Layout Tips and Tricks: How to Optimize Your Decoupling Connection

This article explores the somewhat complicated issue of how exactly to connect a decoupling capacitor to a power pin.


Beyond the Optocoupler: Understanding Digital Isolators

Beyond the Optocoupler: Understanding Digital Isolators

Optocouplers are undoubtedly effective, but alternative isolation technologies may be a better choice for your application.


The Basics of Emitter-Coupled Logic

The Basics of Emitter-Coupled Logic

This article will review the operation of a basic ECL inverter/buffer, and then we’ll look at some of the most important features of this logic family.


PCB Layout Tips and Tricks: Use a Ground Plane Whenever Possible

PCB Layout Tips and Tricks: Use a Ground Plane Whenever Possible

This article discusses the importance of proper grounding techniques in PCB design.


Hardware Assessment: LightCrafter Evaluation Kit for BeagleBoard Black from Texas Instruments

Hardware Assessment: LightCrafter Evaluation Kit for BeagleBoard Black from Texas Instruments

The Texas Instruments DLPDLCR2000EVM is a demonstration cape designed to plug into a BeagleBone Black (BBB) and provide instant-on projection capabilities using a digital micromirror device and a relatively high-power RGB LED.


Projects Jul 09, 2018 by Mark Hughes
How To Control a DC Motor with an Arduino

How To Control a DC Motor with an Arduino

By connecting an L298 bridge IC to an Arduino, you can control a DC motor.


Projects Jul 07, 2018 by Tim Youngblood
What Is Mutual Inductance? A Guide for Circuit Designers

What Is Mutual Inductance? A Guide for Circuit Designers

Learn about mutual inductance and how it can influence an engineer’s approach to circuit and system design.


Feeling Flashy? Tone It Down with the Gentleman Maker’s Raspberry Pi Colorboringizer

Feeling Flashy? Tone It Down with the Gentleman Maker’s Raspberry Pi Colorboringizer

In this episode of the Gentleman Maker, we'll use a Raspberry Pi 3 Model B, an Arduino Nano, and an Arduino Uno to create a handy system to rid ourselves of overly-colorful fashion choices.


Projects Jul 05, 2018 by Robin Mitchell
Use the Xilinx System Generator to Implement a Simple DDS

Use the Xilinx System Generator to Implement a Simple DDS

In this article, we’ll discuss implementing a simple direct digital synthesizer (DDS) using the Xilinx System Generator.


How to Select the Cutoff Frequency of Your Low-Pass Filter

How to Select the Cutoff Frequency of Your Low-Pass Filter

This article provides some tips on how to fine-tune the characteristics of a low-pass filter.


Reverse Polarity Protection: How to Protect Your Circuits Using Only a Diode

Reverse Polarity Protection: How to Protect Your Circuits Using Only a Diode

Connecting power with incorrect polarity is an easy mistake to make. Fortunately, protecting your device from reverse polarity is also quite easy.


I2C Design Mathematics: Capacitance and Resistance

I2C Design Mathematics: Capacitance and Resistance

This article looks at the mathematical calculations used to size the pull-up resistors and determine the maximum length of circuit traces.


What Is Electrical Noise and Where Does It Come From?

What Is Electrical Noise and Where Does It Come From?

This article provides insight into the fundamental characteristics and origins of the electrical signals that you always have but almost never want.


Basics of Phase Truncation in Direct Digital Synthesizers

Basics of Phase Truncation in Direct Digital Synthesizers

This article will discuss phase truncation in direct digital synthesizers.


A Simple, Compact Power Supply for Analog and Mixed-Signal Systems

A Simple, Compact Power Supply for Analog and Mixed-Signal Systems

This project demonstrates and discusses the performance and functionality of an inductorless ±5 V power-supply circuit.


Projects Jun 18, 2018 by Robert Keim