All About Circuits

Latest Filters Technical Articles

Categories

How Reactive Loads and Networks Affect Phase Shift in Analog Circuits

How Reactive Loads and Networks Affect Phase Shift in Analog Circuits

How can reactive elements affect phase shift in an LC circuit? Learn more about phase shift in analog design.


What Is a Low Pass Filter? A Tutorial on the Basics of Passive RC Filters

What Is a Low Pass Filter? A Tutorial on the Basics of Passive RC Filters

What is filtering? Learn what resistor-capacitor (RC) low-pass filters are and where you can use them.


Understanding Phase Shift in Analog Circuits

Understanding Phase Shift in Analog Circuits

Learn about phase shift and how this fundamental electrical phenomenon is related to different circuit configurations.


How to Troubleshoot a Diode Bridge Rectifier

How to Troubleshoot a Diode Bridge Rectifier

This article will examine different faults of a diode bridge rectifier to provide some insight into troubleshooting an AC/DC power supply.


Restoring Digital Signals in Pass-Transistor Logic

Restoring Digital Signals in Pass-Transistor Logic

This article takes a detailed look at the way in which pass-transistor logic degrades a signal and how this signal degradation can be remedied.


Implementing Sequential Circuitry with Pass-Transistor Logic

Implementing Sequential Circuitry with Pass-Transistor Logic

This article discusses the use of pass-transistor configurations in the design of gated latches.


Implementing Multiplexers with Pass-Transistor Logic

Implementing Multiplexers with Pass-Transistor Logic

This article discusses the efficient multiplexers that can be created by using MOSFETs in a pass-transistor configuration.


Digital Design with Pass-Transistor Logic

Digital Design with Pass-Transistor Logic

This article presents efficient, pass-transistor-based implementations of important digital functionality.


How to Eliminate Reflection Noise in Your Next PCB Design

How to Eliminate Reflection Noise in Your Next PCB Design

What is reflection noise? What effects can it have on the functionality of your custom PCB? How can you mitigate it with better design practices?


Introduction to Pass-Transistor Logic

Introduction to Pass-Transistor Logic

This article explores an alternative, and in some cases advantageous, approach to MOSFET-based implementation of digital logic functions.


What Is Bandwidth?

What Is Bandwidth?

This article explores the surprisingly complicated details associated with a word that we frequently use but perhaps don’t fully understand.


How to Measure Noise in Switch-Mode Power Supplies (SMPSs)

How to Measure Noise in Switch-Mode Power Supplies (SMPSs)

Noise on switch mode power supplies (SMPSs) sometimes gets a bum rap.


Schematic Symbols for Electronic Components: Transistors

Schematic Symbols for Electronic Components: Transistors

This two-article series presents an overview of circuit symbols and also provides some information on the components themselves.


How to Reduce Ground Bounce: Mitigating Noise with PCB Design Best Practices

How to Reduce Ground Bounce: Mitigating Noise with PCB Design Best Practices

Learn what ground bounce is and how you can avoid it with design decisions from PCB layout to programming.


How to Design Charge Amplifiers for Piezoelectric Sensors

How to Design Charge Amplifiers for Piezoelectric Sensors

This article explores charge-amplifier design details, including ESD protection and frequency response.


Digital Signal Processing in Scilab: How to Remove Noise in Recordings with Audio Processing Filters

Digital Signal Processing in Scilab: How to Remove Noise in Recordings with Audio Processing Filters

This article is an introduction to the complex topic of DSP-based reduction of noise in audio signals.


How to Perform Frequency-Domain Analysis with Scilab

How to Perform Frequency-Domain Analysis with Scilab

In this article we’ll work with sinusoidal signals in the frequency domain using Scilab’s fast Fourier transform (FFT) functionality.


Introduction to Sinusoidal Signal Processing with Scilab

Introduction to Sinusoidal Signal Processing with Scilab

This article discusses basic signal-processing tasks that can be performed using a free and open source alternative to MATLAB.


How to Build a Class-D Power Amp

How to Build a Class-D Power Amp

Learn how to build your own Class D power amplifier—one of the most efficient ways to listen to music.


Projects Aug 29, 2018 by Cezar Chirila
How to Select the Cutoff Frequency of Your Low-Pass Filter

How to Select the Cutoff Frequency of Your Low-Pass Filter

This article provides some tips on how to fine-tune the characteristics of a low-pass filter.