All About Circuits

Latest Analog Technical Articles

Categories

Classical R-C Oscillators: The Bridged-T Network and the Wien Oscillator Network

Classical R-C Oscillators: The Bridged-T Network and the Wien Oscillator Network

Learn more about these two classic oscillator network topologies, including their simulations.


Integrator Limitations: The Op-Amp’s Output Impedance

Integrator Limitations: The Op-Amp’s Output Impedance

In this second part of a series of articles, we investigate the role of the output impedance of a real-life op-amp.


Integrator Limitations: The Op-Amp’s Gain Bandwidth Product

Integrator Limitations: The Op-Amp’s Gain Bandwidth Product

In this first part of a series of articles, we investigate the role of the op-amp’s gain-bandwidth product (GBP).


A Clever Oscillator Circuit You’ve Probably Never Heard of: The Sulzer Network

A Clever Oscillator Circuit You’ve Probably Never Heard of: The Sulzer Network

Learn about the Sulzer network, an alternative to classic R-C networks that is easier to tune over wide frequency ranges.


Mitigating Noise in Double-sided PCBs: Multipoint Grounding (Gridded Ground) in Two-layer PCB Design

Mitigating Noise in Double-sided PCBs: Multipoint Grounding (Gridded Ground) in Two-layer PCB Design

Learn how to use the gridded ground technique to reduce noise in a double-sided PCB.


How a Ground Plane Reduces PCB Noise

How a Ground Plane Reduces PCB Noise

How does a ground plane reduce noise in a PCB? Learn more in this technical article.


The Right Half-Plane Zero and Its Effect on Stability

The Right Half-Plane Zero and Its Effect on Stability

In this article, we will discuss the right half-plane zero, a byproduct of pole splitting, and its effects on stability.


Pole Splitting in Electronics

Pole Splitting in Electronics

Learn how pole splitting arises as the byproduct of Miller frequency compensation.


The Small-Signal Open-Loop Transfer Function of the Moog Filter

The Small-Signal Open-Loop Transfer Function of the Moog Filter

We are analyzing the behavior of the Moog ladder filter. In this section, we will analyze the heart of the topology and express the small-signal open-loop transfer function of the filter as a whole.


Understanding Schematics

Understanding Schematics

If you're looking to get a better handle on how to read schematics, this helpful guide will give you a head start.


Analyzing the Moog Filter

Analyzing the Moog Filter

Learn about one of the only audio filter topologies out there, the Moog filter!


The Statistical Nature of Noise Analysis: An Introduction

The Statistical Nature of Noise Analysis: An Introduction

This article is an intuitive introduction to the statistical nature of noise and the basic calculations required to combine noise sources in a circuit.


LTspice for Nyquist Plot Analysis

LTspice for Nyquist Plot Analysis

This article explains how to generate and refine a Nyquist plot in LTspice and how to incorporate this plot into your AC analysis.


Introduction to Bandgap Voltage References

Introduction to Bandgap Voltage References

This article presents some basic information about bandgap circuits, which are widely used to generate temperature independent reference voltages.


How to Use Nyquist Plots for Stability Analysis

How to Use Nyquist Plots for Stability Analysis

In this article, we’ll see that a Nyquist plot provides a straightforward means of determining if an amplifier will oscillate.


Understanding Nyquist Plots for Second-Order Filters

Understanding Nyquist Plots for Second-Order Filters

This article continues a series on Nyquist diagrams by explaining Nyquist curves that represent the transfer function of a two-pole filter.


Understanding Cutoff Frequency in a Nyquist Plot

Understanding Cutoff Frequency in a Nyquist Plot

This article continues our exploration of the Nyquist plot by examining the relationship between the plot’s curve and a filter’s cutoff frequency.


Low-Noise Voltage References: Understanding the Noise Performance of a Voltage Reference IC

Low-Noise Voltage References: Understanding the Noise Performance of a Voltage Reference IC

Working with a low noise voltage reference? Learn more about noise specifications and relevant voltage reference ICs.


Using LTSpice for Amplifier Noise Measurement

Using LTSpice for Amplifier Noise Measurement

Learn how to measure noise using LTspice for op-amp circuits with handy examples.


How to Use a Nyquist Plot for AC Analysis

How to Use a Nyquist Plot for AC Analysis

This article introduces the Nyquist plot and explains how to interpret this alternative method of visually evaluating a system’s frequency response.